RAMCO SPECIALTY PRODUCTS -- SYNTHETIC COMPRESSOR OILS, 1219  -- 9150-00N085334
<pre>=====================  Product Identification  =====================

Product ID:SYNTHETIC COMPRESSOR OILS, 1219
MSDS Date:10/07/1997
FSC:9150
NIIN:00N085334
=== Responsible Party ===
Company Name:RAMCO SPECIALTY PRODUCTS
Address:1400 S SUNKIST NUMBER 91
City:ANAHEIM
State:CA
ZIP:92806-5619
Country:US
Info Phone Num:800-334-7071
Emergency Phone Num:800-255-3924
Preparer's Name:LINDA SUE SHEPHERD
CAGE:0AV13
=== Contractor Identification ===
Company Name:RAMCO SPECIALITY PRODUCTS
Address:5956 STATE RD
Box:City:BAKERSFIELD
State:CA
ZIP:93308-3022
Country:US
Phone:714-758-7795
CAGE:0AV13
Company Name:RAMCO SPECIALTY PRODUCTS
Address:1400 S SUNKIST NO 91
Box:City:ANAHEIM
State:CA
ZIP:92806-5617
Country:US
Phone:714-758-7795/800-334-7071
CAGE:0ZUM2

=============  Composition/Information on Ingredients  =============

Ingred Name:NON-HAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: NOT NORMALLY EXPECTED TO CAUSE
    ANY ILL EFFECTS EXCEPT IN VERY SENSITIVE INDIVIDUALS. INGESTION:
    TREAT AS OIL INGESTION. INHALATION: NOT APPLICABLE. SKIN: MAY CAUSE
    IRRITATION IN SENSITIVE INDIVI DUALS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH WATER USING EYECUP OR FOUNTAIN FOR AT LEAST
    15 MINUTES. SEEK MEDICAL ATTENTION IF IRRITATION PERSISTS. INGEST:
    TREAT AS OIL INGESTION. INHAL: REMOVE FROM CONTAMINATED AREA TO
    FRESH AI R. SKIN: REMOVE CONTAMINATED CLOTHING. WASH WITH SOAP AND
    WATER. SEEK MEDICAL ATTENTION IF IRRITATION PERSISTS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:480F,249C
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, WATER FOG, FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . TREAT AS OIL FIRE.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:STOP FLOW. WIPE UP, MOP UP OR ABSORB WITH
    ABSORBENT MATERIAL. STORE IN APPROPRIATE CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE STANDARD INDUSTRIAL PRACTICES.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY REQUIRED. USE NIOSH APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST SUFFICIENT TO MAINTAIN ATMOSPHERE BELOW TLV
    LIMIT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE EXCEPT USUAL PRECAUTIONS - WASH HANDS WITH
    SOAP AND WATER BEFORE EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Spec Gravity:0.88
Solubility in Water:NIL
Appearance and Odor:CLEAR LIQUID; MILD PETROLEUM ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID WELDING.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.