BERNZOMATIC CORP -- MAPP GAS -- 6830-00-935-1125
===================== Product Identification ===================== Product ID:MAPP GAS MSDS Date:06/13/1986 FSC:6830 NIIN:00-935-1125 === Responsible Party === Company Name:BERNZOMATIC CORP Address:ONE BERNZOMATIC DRIVE City:MEDINA State:NY ZIP:14103-1648 Country:US Info Phone Num:716-798-4949 Emergency Phone Num:716-798-4949 Preparer's Name:ROGER L. MAXON CAGE:70785 === Contractor Identification === Company Name:BERNZOMATIC CORP Address:ONE BERNZ O MATIC DRIVE Box:City:MEDINA State:NY ZIP:14103-1648 Country:US Phone:716-798-4949 CAGE:70785 Company Name:WESTERN HARDWARE (415-468-5249) Box:UNKNOW CAGE:NO765 ============= Composition/Information on Ingredients ============= Ingred Name:METHYL ACETYLENE (PROPYNE) CAS:74-99-7 RTECS #:UK4250000 Fraction by Wt: 100% Other REC Limits:NONE RECOMMENDED OSHA PEL:1000 PPM ACGIH TLV:1000 PPM; 9394 ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ASPHYXIANT. MAY REDUCE WXYGEN REQUIRED FOR BREATHING. LIQUID GAS MAY FREEZE SKIN. Explanation of Carcinogenicity:MANUFACTURER GAVE NO COMMENTS OTHER THAN THE ABOVE REFERENCES TO THE THREE LISTINGS. Effects of Overexposure:DIZZINESS TO UNCONSCIOUSNESS IF HIGH CONCENTRATIUONS OF GAS REPLACE OXYGEN FOR BREATHING. ======================= First Aid Measures ======================= First Aid:REMOVE EXPOSED PERSON TO FRESH AIR. UF UNCONSCIOUS, SEEK MEDICAL ATTENTION. ===================== Fire Fighting Measures ===================== Flash Point Method:CC Flash Point:-99F,-73C Lower Limits:3.0 Upper Limits:11.0 Extinguishing Media:ELIMINATE OXYGEN SOURCE OR STOP FLOW OF GAS. USE WATER TO COOL CYLINDER. DRY CHEMICAL OR CARBON DIOXIDE TO REDUCE OXYGEN Fire Fighting Procedures:COOL CYLINDERS WITH WATER. KEEP PERSONNEL AWAY. Unusual Fire/Explosion Hazard:KEEP IGNITION SOURCES AWAY FROM CYLINDER AND CONTINUE TO COOL CYLINDER UNTIL GAS FLOW IS SHUT OFF. ESCAPING GAS FROM CYLINDER MAY BE IGNITED. ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE IGNITION SOURCES AND VENTILATE AREA. Neutralizing Agent:NO INFORMATION GIVEN BY MFR ON MSDS. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE IN WELL VENTILATED AREA AWAY ROM ALL IGNITION SOURCES. STORE AT TEMPERATURES BELOW 125F. STORE OUT OF DIRECT SUNLIGHT. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NOT REQUIRED WITH NORMAL USE. Ventilation:LOCAL EXHAUST ADVISABLE WHEN WELDING, OTHERWISE "N/A". Protective Gloves:ADVISABLE WHEN WELDING. Eye Protection:FILTER SHADE #4 OR DARKER FOR WELDING Supplemental Safety and Health MSDS RECEIVED FROM GSA. ================== Physical/Chemical Properties ================== HCC:G2 NRC/State Lic Num:NONE Boiling Pt:B.P. Text:-36F,-38C Vapor Pres:109 PSIG Vapor Density:1.48 Spec Gravity:.571 Solubility in Water:SLIGHT Appearance and Odor:COLORLESS, UNPLEASANT ODOR AT APPROX. 100 PPM ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES EXTREMELY FLAMMABLE. AVOID UNCONTROLLED CONTACT WITH OXIDIZERSS Stability Condition to Avoid:DO NOT EXPOSE TO TEMPERATURES ABOVE 125F. Conditions to Avoid Polymerization:WILL NOT OCCUR. ==================== Disposal Considerations ==================== Waste Disposal Methods:VENT TO ATMOSPHERE IN OUTDOOR AREA FREE OF ALL SOURCES OF IGNITION. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.